1.0 lb. foam cover is ultra lightweight, has a 4″-2″ taper and is best for indoors/mild outdoors.Approx. R-value: 12
EXTRA COSTS: INCLUDED // 1-year warranty
Spa Covers
Our spa covers are not an inexpensive, but a cover engineered and built to withstand the test of time. If you are shopping for price only, we we may not be as competitive, however if you’re looking for quality, dependability and the best warranty, then you have found what you are looking for.
Our “ECONOMY” series cover starts at $399
There are many levels of spa cover quality and pricing so please note the differences between our product and other covers you may be considering.
2-panel panel cover (up to 95″ x 95″) includes:
- Outer panels slope from 4″-to-2″ of 1# grade insulating foam
- Each of the two panels are attached with a vinyl hinge
- Covered in 30 oz. marine grade vinyl with UV inhibitors built-in
- 2-safety straps on each panel (nylon webbing covered in matching vinyl)
- 2-sewn in handle
- 1-year limited warranty for “ECONOMY” with “DELUXE,” “ULTRA” and “THE WORKS” having extended warranty periods.
(Delivery, installation of locking straps or deck anchor systems will have additional charges)
No matter how you view the process of covering your spa, quality spa covers can be expensive. Our approach here has been to develop spa covers that will stand the test of time, present an ease of use and storage and carry the best and longest warranty available. We have found in recent years that the “standard” or typical 2-piece covers being produced are usually flat and about 1″-2″ thick. This kind of construction usually sells in the $199 – $299 price range and yet has a shorter than average life span. This is primarily due to the flat construction and inability of the cover to handle moisture run off. Most of these covers begin sagging as soon as water pools up on the cover or animals start resting or standing on them.
Our spa covers are made of the best materials and superior design to offer years of use and protection from the elements.
Click on any color to display a larger view
SKIRT LENGTH:
Please measure the skirt from the bottom of the cover down to bottom of skirt. We can make cover with skirts from 1.5″ to 5″, or with no skirts at all.
SAFETY STRAP LENGTH:
The safety strap is measured from the bottom of the cover down as shown. Please include the skirt length but not the clip. The strap must hang at least 1.5″ below the skirt. Please note: due to original production variations, it is not possible to guarantee matching strap placement. All hardware is included. 7″ straps will be used if no length is entered.
FOAM INSULATION OPTIONS
Our Spa Cover use super-insulating virgin foam core and contains no ozone depleting CFC or HCFC.
Choose from four foam options:
ECONOMY
STANDARD
1.5 lb foam cover is good for mild to moderate climates and exceeds the ATSM standards for strength and safety.
EXTRA COSTS: ADD $35 // 3-year warranty
DELUXE
2.0lb foam model is denser and therefore less likely to absorb moisture. It provides twice the strength of our Economy foam along with additional insulation properties (Approx. R-Value: 14.5). This cover is ideal for not only snowy climates as it supports up to 500 lbs of static snow weight but is also beneficial for moderate climates as it will reduce your heat loss and save you money in energy. This cover is also safer if you have small children or perhaps a dog that likes to snooze on top of your spa.
EXTRA COSTS: ADD $60 // 3-year warranty
ULTRA
Our Ultra insulation is both super-energy efficient and water resistant. This cover is formulated for heavy loads as it is constructed with a generous 6″ to 4″ taper. It is beneficial not only in areas with severe weather conditions (supports up to 1000 lbs of static snow weight) but ANYWHERE energy savings are a concern (you don’t have to be in a cold climate to save a bundle on energy). With an R-Value of 24, this spa lid is one of the highest energy efficient spa covers on the market. As an added bonus, the Ultra comes FREE with the continuous heat seal and reinforced center hinge.
EXTRA COSTS: ADD $185 // 4-year warranty
THE WORKS
“The Works”is the best cover we have ever designed. With maximum energy efficiency, strength and longevity this cover goes a long step further than our Ultra. It is stronger (supports up to 1400 lbs of static snow weight), reduces utility expense (R-Value exceeding 30) and will outlast any cover on the market today (highest foam density + maximum foam thickness = longer life span). This cover features wind rated security straps and a vacuum sealed and welded double wrap vapor shield (12 mil thick) and a heat seal with reinforced hinge. This may be our most expensive cover however if you factor in your energy cost over just five years (the length of our non-prorated warranty) this becomes the least expensive and most effective cover you can invest in.
EXTRA COSTS: ADD $350 // 5-year warranty
DOUBLE WRAP CORE
Get extra moisture protection with TWO layers of heat sealed 6 mil polyethylene sheeting. If you’ve ever been stuck with a soggy cover, this is the option for you. It can add even more years to the life of your cover! (Included with The Works spa cover at no additional charge)
EXTRA COSTS: ADD $35 // Recommended option for all ECONOMY and DELUXE covers!